Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

ANVISION 5V PoE Splitter, Adapter von 48 V auf 5 V, 2,4 A, Stecker 3,5 mm x 1,35 mm, 5,5 mm x 2,1 mm, IEEE 802.3af-konform, für IP-Kameras und mehr

Kostenloser Versand ab 25.99€

9.23€

4 .99 4.99€

Auf Lager

1.Farbe:3.5mm X 1.35mm / 5.5mm X 2.1mm (5v)


Info zu diesem Artikel

  • AUSGANG: 5 V Gleichstrom (max. 5 V, 2,4 A, 12 Watt, Stecker 3,5 mm x 1,35 mm, 5,5 mm x 2,1 mm), Ethernet-Daten mit 10/100 Mbit / s
  • EINGANG: IEEE 802.3af (DC44-56V) vom Poe-Schalter oder Poe-Injektor
  • PLUG and PLAY: Keine Konfiguration erforderlich, eine einfache Lösung, um Ihr Netzwerk dahin zu erweitern, wo Sie Netzwerkgeräte platzieren möchten, ohne eine Steckdose zu haben
  • ANWENDUNG: Funktioniert mit Nicht-PoE-Netzwerkgeräten, die einen 5-V-Gleichstromeingang und einen Ethernet-Eingang benötigen, z. B. IP-Kameras und mehr. Bitte beachten Sie: Dieser Spitter ist nur mit 10/100 Mbit / s Nicht-PoE-Geräten kompatibel. Gigabit-Nicht-PoE-Geräte werden NICHT unterstützt
  • GARANTIE: 2 Jahre und unbegrenzter technischer Support. Lieferumfang: 1x 5V PoE Splitter


Der PoE-Splitter teilt ein PoE-Signal in eine 5-V-Gleichstrom- und 10/100-Mbit / s-Ethernet-Datenquelle auf.
Mit diesem Gerät können Sie Ethernet-Kabel von einem PoE-Switch über große Entfernungen verlegen und dann das PoE-Signal in ein separates Datensignal und 5-VDC-Stromquellen aufteilen, um Nicht-PoE-Geräte zu betreiben.
Technische Daten:
Eingang: 44-56VDC max; Geschirmte RJ-45-Buchse
Leistung: 5VDC 2,4A 12W max.
DC-Buchse: Stecker: 3,5 mm x 1,35 mm und 5,5 mm x 2,1 mm
Länge des Ausgangskabels: 19.0cm
Betriebsumgebungstemperatur: -10 bis 45 ℃
Zulassungsbestimmungen IEEE 802.3af
Was ist enthalten:
1x 5V PoE Splitter
Hinweis: Dieser 5-V-PoE-Spitter ist nur mit 10/100-Mbit / s-Nicht-PoE-Geräten kompatibel. Er unterstützt KEINE Gigabit-Nicht-PoE-Geräte.


TK
Bewertet in Deutschland am 22. Februar 2025
Für denjenigen dem 100 Mbps reichen ist das ein passendes Teil
Mike X
Bewertet in den USA am2. April 2025
I've been using this for the better part of a year now and it has worked flawlessly. I use it to power an original raspberry pi installed inside my generac generator. This allows me to power-cycle the Rpi if needed remotely using the PoE management on my switch. This has performed in temperature ranges from over 100 degrees to well below freezing. I would absolutely recommend this product.
Would you? Oh Wait!
Bewertet in Kanada am 31. Dezember 2024
Had this unit for a few months now and its running 24/7. Have not had any issues with the POE going off line. Only time will tell, but so far so good!
Mike
Bewertet in Großbritannien am 26. Juli 2023
Great product, works as advertised but did not come with the advertised adapter.
Dash
Bewertet in den USA am9. November 2022
I was installing an alexa dot in the wall and didn't want wiring to show ..so I ran my cat5 to a poe switch and with this adapter powered it right up!
Tim
Bewertet in Australien am 6. April 2022
It does the job pretty well. I have been using it for a month now to power my pi4 that is connected to a TP-Link Poe switch. No problem. For this price, I couldn't find anything better. The only thing you may consider is the bandwidth. If you are planning to use the connected device as a router or NAS then go for Gigabit LAN options as this is a 10/100 Mbps connector. Otherwise this is perfect.
Produktempfehlungen

91.99€

44 .99 44.99€

4.7
Option wählen