Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Overview
The ESP32-C6-Zero-M is a low-cost, high-performance microcontroller development board with a compact size and rich peripheral interfaces.
Adopts ESP32-C6-MINI-1 as the main chip, with RISC-V 32-bit single-core processor, support up to 160 MHz, and built-in 320KB ROM 512KB HP SRAM,
16KB LP SRAM, and 4 MB flash. Onboard standard Raspberry Pi Pico pin headers, it can be compatible with multiple peripheral devices and is easier to use in
different application scenarios.
You can choose ESP-IDF and Arduino in software so that you can easily and quickly get started and apply it to the product.
Board Specifications
Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz
Built in 320KB ROM, 512KB of HP SRAM, 16KB LP SRAM and 4MB Flash memory
Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance
Castellated module and onboard ceramic antenna, allows soldering directly to carrier boards
Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
Onboard USB Type-C port, 22 × GPIO pins allows flexibly configuring pin functions
Note
Please use the provided " WS_TCA9554PWR " file to set GPIO22（SDA）and GPIO23（SCL）as I2C functions for GPIO extension to make the device function complete.
Please note that GPIO22 (SDA) and GPIO23（SCL） are used for TCA9554PWR, and you only can connect these pins to I2C slave device, and do not connect to others.
Development Resources
https://www.waveshare.com/wiki/ESP32-C6-Zero?Amazon
Package Content
ESP32-C6-Zero with pre-soldered header x1
