Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

ST7357 10Gb RJ45 Ethernet Netzwerkkarte mit Marvell AQtion AQC107 Controller, PCIE 3.0 X4 Schnittstelle, Kompatibel mit MAC OS/Windows/Linux/ESX

Kostenloser Versand ab 25.99€

55.45€

29 .99 29.99€

Auf Lager

1.Stil:Pcie 4.0


Info zu diesem Artikel

  • 10Gb RJ45 Ethernet-Netzwerkkarte (Marvell AQUANTIA AQC107 Controller), PCIe 3.0 X4 Schnittstelle, abwärtskompatibel mit PCIe 2.0 X4
  • Unterstützte Datenraten: 100 Meter über Cat 6a bei 10G/5G/2.5G/1G/100M oder Cat 5e bei 5G/2.5G/1G/100M
  • Energieverwaltung: Wake-on-LAN (WoL);Boot-Optionen: UEFI und PXE;Jumbo Frames (bis zu 9Kbytes);QoS: Bis zu acht Verkehrsklassen
  • OS-Kompatibilität: Mac OS; Windows 7/8/10/11; Windows Server 2003/2008/2012/2016/2019/2022; Linux 3.2 bis 4.4, etc
  • Es wird mit einer vorinstallierten 12-cm-Halterung mit normalem Profil und einer 8-cm-Halterung mit niedrigem Profil geliefert.



Produktinformation

Modell: ST7357

Interne Schnittstelle PCIe 3.0 X4
Externe Schnittstelle RJ45 10G/5G/2.5G/1G/100Mbps
Chip AQUANTIA AQC107
OS-Kompatibilität Windows 10, 8.1, 8, 7 (32/64 Bit), Linux 3.2, 3.10, 3.12, 4.2 und 4.4
ST7357
ST7357
ST7357
ST7357
ST7357

Jacob
Bewertet in den USA am17. Februar 2025
I have a 10gb network and needed one last card to finish so decided to try this. I already use another Aqtion AQC107 controller so I kind of figured this would be good and so far it's not disappointed. I'm getting close to full throughput and honestly I'm not chasing anything past that. Over all it's a good buy for the money unless you wanna pickup one of the more ancient intel cards.
Kevin H.
Bewertet in den USA am13. März 2025
Card works great! Deployed in a QNAP TS-464 - save over half from buying a QNAP branded card, which uses the EXACT same chipset. QNAP discovered it without issue - no need to update drivers or any other changes - plug and play!As for the bracket - QNAP uses a special low profile bracket. This card includes a low profile bracket but doesn't directly fit (even QNAPs card doesn't include the right one - you have to pay another $20 or more for it!). Easy fix - just take the low profile bracket, and where the bracket bends 90 degrees at the top, manually bend it straight. You may also have to shape the top area you bent a little so it fits. Use the blank template cover in your QNAP device as a template. Then simply drill a hole - align with the blank template. Now install and use a self tapping screw - all set. The hole you drill should be small - let the small self tapping screw do the work. Alternatively you can use a TAP set and drill / tap the hole and use a machine screw. Either way, very easy. Alternatively - simply use the blank as a template and 3D print a bracket - easy as well.Great card!
Jonathan DeVega
Bewertet in den USA am29. Dezember 2024
can confirm this works with my 2010 Mac Pro 5,1 as well as my 2012 Mac Mini with an external enclosure.
Produktempfehlungen

40.02€

18 .99 18.99€

5.0
Option wählen

11.99€

5 .99 5.99€

4.9
Option wählen

9.99€

4 .99 4.99€

4.7
Option wählen