Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Waveshare 4.2 Inch E-Paper Display Module Kit 400 x 300 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/Arduino,Support Full Refresh

Kostenloser Versand ab 25.99€

45.99€

23 .99 23.99€

Auf Lager

Info zu diesem Artikel

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.


"400x300, 4.2inch E-Ink display module, SPI interface

Overview

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

Operating voltage: 3.3V~5V

Interface: 3-wire SPI, 4-wire SPI

Outline dimension: 103.0mm × 78.5mm

Display size: 84.8mm × 63.6mm

Dot pitch: 0.212 × 0.212

Resolution: 400 × 300

Display color: black, white

Grey level: 4

Full refresh time: 4s

Refresh power: 26.4mW(typ.)

Standby power:

Viewing angle: >170°


Development Resources
Wiki : www.waveshare.com/wiki/4.2inch_e-Paper_Module?amazon

PACKAGE CONTENT

  1. 4.2inch e-Paper Module x1
  2. PH2.0 20cm 8Pin x1

Alexandru MARIN
Bewertet in Deutschland am 14. Februar 2025
Waveshare never disappoints when it comes to quality.
Mark Forrest
Bewertet in Großbritannien am 18. August 2024
Works well with Raspberry Pi Zero (1&2). Makes a neat little display to make map road book for trips.Partial screen update/refresh was surprisingly clean and quick.
Paul Gonchar
Bewertet in den USA am11. Dezember 2024
Hooked it up to an ESP32 - works no problem! Yes, there was some reading and video watching I had to do to get the pins right (couldn't get it to work with ESP32-C6, but S2 worked perfectly! I probably had to spend a bit more time with the C6 - just was lazy). So, as far as display itself - crisp and works as expected from an E-Ink display.
Eudora
Bewertet in Frankreich am 20. Juni 2023
Produit semble conforme, belle finition.
BLAM
Bewertet in Spanien am 29. Dezember 2021
Este producto funciona muy bien, lo uso con un ESP32 de Lilygo (con Lora, oled)...Se necesita librería GxEPD2, y SI que tiene un "partial refresh" ;) (por lo menos el 4.2")
jay
Bewertet in Australien am 22. November 2019
it came quickly, very safely packed and with instructions.the product itselfVERY Impressive screen. Super low power to update, an none at all to maintain the image :D (not as fast update as the little ones, but such a nice size for lots of info at longer updates.perfect for my weather display -it was easy to find examples for using it with the arduino ide (i had it going on a mega2560, esp8266 and i have it on the esp32, showing weather updates from the web, and my local sensors for a couple of months now without issues) - each with different libraries .
R. Werner
Bewertet in Deutschland am 15. Mai 2019
Auch wenn ich Einsteiger beim Raspberry bin, so darf ich mir zutrauen, so eine Anzeige ans Laufen zu bekommen, immerhin habe ich schon viele andere Displays am Rasp in Betrieb nehmen dürfen, auch zwei Displays mit verschiedenen Auflösungen und verschiedenen Anzeigen.Eigentlich wollte ich mit der e-Ink Option experimentieren um später mehrere dieser Display zu einer größeren Infotafel zu kombinieren. Aber mit Hilfe der Anleitung bekommt man das Display ja nicht einmal angeschlossen, geschweige denn, zum Laufen.Ich kann von diesem Hersteller gerade nur abraten, es sei denn man findet das baugleiche Display woanders mit einer brauchbaren Anleitung.
Ghaslbe
Bewertet in Deutschland am 7. Mai 2018
4.2 Zoll Display funktioniert einwandfrei an meinem NodeMCU und holt sich so alle 20 min die aktuellen News.Kontrast ist einwandfrei. Stromverbrauch incl NodeMCU beim aktualisieren ca 0,04 Watt, sonst nicht messbar mit meinem USB Powermeter. Alles wie es sein soll.
Christoph Werner
Bewertet in Deutschland am 29. Juni 2018
Schwarz/weiß und sehr gute Lesbarkeit, wie ein Epaper sein sollte. Dokumentation auf der Herstellerhomepage ist super und Bibliotheken zum einfachen Ansteuern findet man im Netz zu Hauf (z.B. bei Adafruit). Nutze es mit einem ESP32 und habe keine nennenswerte Probleme gehabt Text und Bilder darzustellen.
Produktempfehlungen

7.48€

2 .99 2.99€

4.6
Option wählen